Listado de publicaciones

Más recientes:

 

Autores (p.o. de firma): M. López-Aenlle, P. Fernández, R. Brincker, A. Fernández-Canteli

Título: “ Scaling Factor Estimation Using An Optimized Mass Change Strategy”

Revista : Mechanical Systems and Signal Processing Clave: A   Volumen: 24    

Páginas, inicial:          3061    final:3074         Fecha: 2010

 


 

Autores (p.o. de firma):, A. Fernández-Canteli, E. Castillo, H. Pinto, M. López Aenlle

Título: “Estimating the S-N field from strain-lifetime curves ”

Revista: Strain            Volumen: 47 Issue Supplement S1   Páginas, inicial: e93  final: e97

Fecha: 2011

 


Autores (p.o. de firma): P. Fernández, P. Reynolds and M. López-Aenlle

Título:”Scaling Mode Shapes in Output-Only Systems by a Consecutive Mass Change Method”

Revista: Experimental Mechanics  

Volumen: 5    Nº:6                 Páginas, inicial:995                final:1005        Fecha: 2011

 


Autores (p.o. de firma): M. López Aenlle , R. Brincker, P. Fernández, A. Fernández-Canteli.

Título: “On exact and approximated formulations for scaling mode shapes in operational modal analysis by mass and stiffness change”

Revista: Journal of Sound and Vibration. 

Volumen: 331 Issue:3            Páginas, inicial: 622  final:637           Fecha: 2012

 


 

Autores (p.o. de firma): M. L. Aenlle, P. Fernández.

Título: “Frequency Response of Laminated Glass Elements: Analytical Modeling and Effective Thickness”

Revista: Applied Mechanics Reviews. 

Volumen: 64 (2)         Páginas, inicial: 20802-1 final: 20802-13      Fecha: Febrero 2013

 


 

Autores (p.o. de firma): M.L.Aenlle, P. Fernández, A. Fernández-Canteli, M. García

Título: “The Effective Thickness Concept in Laminated Glass Elements Under Static Loading”

Revista: Engineering Structures

  Volumen: 56            Páginas, inicial:1092  final: 1102                   Fecha: 2013

 


 

Autores (p.o. de firma): M.L. Aenlle, R. Brincker

Título: “Modal Scaling in Operational Modal Analysis Using a Finite Element Model”

Revista: International Journal of Mechanical Sciences

Volumen: 76              Páginas, inicial:86     final:101           Fecha: 2013

 


 

Autores (p.o. de firma): R. Brincker, A. Skafte, M.L.Aenlle, A. Sestieri, W. D’Ambrogio, A. Fernández-Canteli,

Título: “A Local Correspondence Principle for Mode Shapes in Structural Dynamics”

Revista: Mechanical Systems and Signal Processing 

 Volumen: 45             Páginas, inicial:          91        final:    104      Fecha: 2014

 


 

Autores (p.o. de firma): M. L. Aenlle, P. Fernández

Título: “Dynamic effective thickness in laminated-glass beams and plates”

Revista:Composites Part B: Engineering 

 Volumen: 67             Páginas, inicial: 332   final:    347      Fecha: 2014

 


 

Autores (p.o. de firma): R. Brincker, M. López-Aenlle

Título: “Mode shape sensitivity of two closely spaced eigenvalues”

Revista: Journal of Sound and Vibration 

Volumen:334             Páginas, inicial:          377      final: 387         Fecha: 2015

 

 

OTROS:

  • International Journal of Fatigue [2012] – Checking the fatigue limit from thermographic techniques by means of a probabilistic model of the epsilon-N field

  • International Journal of Solids and Structures [2012] – Influence of temperature on a carbon-fibre epoxy composite subjected to static and fatigue loading under mode-I delamination

  • International Journal of Structural Integrity [2012] – A procedure to derive probabilistic fatigue crack propagation data

  • Experimental Techniques [2012] – Influence of the Loading System on Mode I Delamination Results in Carbon-Epoxy Composites

  • Applied Mechanics and Materials [2012] – Evaluation of concrete fatigue measurement using standard and nonlinear regression model

  • Applied Mathematical Modelling [2012] – Rainflow analysis in Coastal Engineering using switching second order Markov models

  • Journal of Pressure Vessel Technology, Transactions of the ASME [2012] – Probabilistic fatigue assessment of a notched detail taking into account mean stress effects

  • Composites Science and Technology [2012] – Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

  • Composite Structures [2012] – Influence of the crack plane asymmetry over GII results in carbon epoxy ENF specimens

  • Experimental Mechanics [2011] – Influence of the Matrix Type on the Mode I Fracture of Carbon-Epoxy Composites Under Dynamic Delamination

  • Strain [2011] – Viscoelastic Characterisation of the Temporomandibular Joint Disc in Bovines

  • Experimental Mechanics [2011] – Scaling Mode Shapes in Output-Only Systems by a Consecutive Mass Change Method

  • Mechanics of Materials [2011] – Influence of the matrix constituent on mode i and mode II delamination toughness in fiber-reinforced polymer composites under cyclic fatigue

  • Experimental Mechanics [2011] – Non-linear Viscoelastic Model for Behaviour Characterization of Temporomandibular Joint Discs

  • Materials and Design [2011] – Experimental characterization and modelization of the relaxation and complex moduli of a flexible adhesive

  • Composites Science and Technology [2011] – Influence of titanium carbide on the interlaminar shear strength of carbon fibre laminate composites

  • Journal of the European Ceramic Society [2011] – Deriving the primary cumulative distribution function of fracture stress for brittle materials from 3- and 4-point bending tests

  • Engineering Fracture Mechanics [2011] – Influence of the t33-stress on the 3-D stress state around corner cracks in an elastic plate

  • Construction and Building Materials [2011] – Manufacture of concrete kerbs and floor blocks with recycled aggregate from C&DW

  • Revista de plásticos modernos [2011] – Estudio y caracterización de envases de nanocompuestos de PET con sepiolitas elaborados por extrusión-termoconformado

  • Engineering Failure Analysis [2011] – Forensic evaluation of building damage using subsidence simulations

  • Strain [2011] – Estimating the S-N field from strain-lifetime curves

  • International Journal of Damage Mechanics [2011] – Influence of Resin Type on the Delamination Behavior of Carbon Fiber Reinforced Composites Under Mode-II Loading

  • Mechanics of Time-Dependent Materials [2011] – Study of the interconversion between viscoelastic behaviour functions of PMMA

  • Journal of Constructional Steel Research [2011] – Stiffness of the component ‘lateral faces of RHS’ at high temperature

  • Polymer Testing [2011] – Modelling ENF test procedure by means of the two-step extension method. Influence of friction forces

  • Conference Proceedings of the Society for Experimental Mechanics Series [2011] – Experimental evaluation of mass change approaches for scaling factors estimation

  • Procedia Engineering [2011] – An iterative method to obtain the specimen-independent three-parameter Weibull distribution of strength from bending tests

  • Journal of Sound and Vibration [2011] – On exact and approximated formulations for scaling-mode shapes in operational modal analysis by mass and stiffness change

  • Procedia Engineering [2011] – Influence of the mode mixity ratio and test procedures on the total energy release rate in carbon-epoxy laminates

  • Strain [2011] – Influence of Temperature on the Fatigue Behaviour of Glass Fibre Reinforced Polypropylene

  • Journal of Computational Science [2011] – Numerical modelling of the interaction macro-multimicrocracks in a plate under tensile stress

  • Engineering Failure Analysis [2011] – Forensic evaluation of building damage using subsidence simulations

  • Physics and Chemistry of Minerals [2011] – Chemical and physical characterization of iron-intercalated vermiculite compounds

  • Construction and Building Materials [2011] – Assessment of properties of recycled concrete by means of a highly fractioned factorial design of experiment

  • Engineering Structures [2010] – Mixed mode fracture toughness: An empirical formulation for GI/GII determination in asymmetric DCB specimens

  • Procedia Engineering [2010] – Using statistical compatibility to derive advanced probabilistic fatigue models

  • Key Engineering Materials [2010] – On the path and area Jx1-integral components and their relationship to the out-of-plane constraint in elastic cracked plates

  • International Journal of Solids and Structures [2010] – On the Jx1-integral and the out-of-plane constraint in a 3D elastic cracked plate loaded in tension

  • Materials and Structures [2010] – Long term deformations by creep and shrinkage in recycled aggregate concrete

  • Mechanical Systems and Signal Processing [2010] – Scaling-factor estimation using an optimized mass-change strategy

  • Polymer Testing [2010] – Theoretical and experimental analysis of carbon epoxy asymmetric dcb specimens to characterize mixed mode fracture toughness

  • Procedia Engineering [2010] – Fracture mechanics of the three-dimensional crack front: Vertex singularity versus out of plain constraint descriptions

  • Building and environment [2010] – Sound transmission loss analysis through a multilayer lightweight concrete hollow brick wall by FEM and experimental validation

  • Engineering Structures [2010] – Resistance of the component ‘lateral faces of RHS’ at high temperature

  • Mechanical Systems and Signal Processing [2010] – Scaling-factor estimation using an optimized mass-change strategy (2)

  • Mechanical Systems and Signal Processing [2010] – Erratum to “Scaling-factor estimation using an optimized mass-change strategy” [Mech. Syst. Signal Process. 24(5) (2010) 1260-1273] (DOI:10.1016/j.ymssp.2009.06.011)

  • Polymer Composites [2010] – Fatigue Delamination, Initiation, and Growth, Under Mode I and II of Fracture in a Carbon-Fiber Epoxy Composite

  • International Journal of Fatigue [2010] – Fatigue assessment of a riveted shear splice based on a probabilistic model

  • Bulletin of Engineering Geology and the Environment [2010] – Determination of the stress state in a rock mass subjected to excavation

  • Mechanics of Advanced Materials and Structures [2010] – Compliance Correction for Numerical and Experimental Determination of Mode I and Mode II Composite Fracture Failure

  • Materiales de construccion [2010] – Application of experimental plans method to formulate a self compacting cement paste

  • Fatigue & Fracture of Engineering Materials & Structures [2010] – Building models for crack propagation under fatigue loads: application to macrocrack growth

  • International Journal of Fatigue [2010] – A new probabilistic model for crack propagation under fatigue loads and its connection with Wohler fields

  • Meccanica [2010] – Computational models for mode I composite fracture failure: the virtual crack closure technique versus the two-step extension method

  • American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP [2010] – Analysis of constant and variable amplitude strain-life data using a novel probabilistic Weibull regression model

  • Mechanics of Advanced Materials and Structures [2010] – Compliance Correction for Numerical and Experimental Determination of Mode I and Mode II Composite Fracture Failure

  • Experimental Mechanics [2010] – Scaling Mode Shapes in Output-Only Systems by a Consecutive Mass Change Method

  • Procedia Engineering [2010] – Using statistical compatibility to derive advanced probabilistic fatigue models

  • Key Engineering Materials [2010] – On the path and area Jx1-integral components and their relationship to the out-of-plane constraint in elastic cracked plates

  • Journal of Alloys and Compounds [2010] – Production of dispersed nanometer sized YAG powders from alkoxide, nitrate and chloride precursors and spark plasma sintering to transparency

  • Building and environment [2010] – Sound transmission loss analysis through a multilayer lightweight concrete hollow brick wall by FEM and experimental validation

  • Procedia Engineering [2010] – Fracture mechanics of the three-dimensional crack front: Vertex singularity versus out of plain constraint descriptions

  • Meccanica [2010] – Computational models for mode I composite fracture failure: the virtual crack closure technique versus the two-step extension method

  • International Journal of Coal Geology [2010] – Storage of N-2, He and CH4 in coal: Study and application in a practical case in the central Asturian coal basin (northern Spain)

  • Mechanical Systems and Signal Processing [2010] – Scaling-factor estimation using an optimized mass-change strategy (2)

  • Experimental Mechanics [2010] – Influence of the Matrix Type on the Mode I Fracture of Carbon-Epoxy Composites Under Dynamic Delamination

  • American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP [2010] – Analysis of constant and variable amplitude strain-life data using a novel probabilistic Weibull regression model

  • Polymer Composites [2010] – Fatigue Delamination, Initiation, and Growth, Under Mode I and II of Fracture in a Carbon-Fiber Epoxy Composite

  • Materials and Structures [2010] – Long term deformations by creep and shrinkage in recycled aggregate concrete

  • International Journal of Fatigue [2010] – A new probabilistic model for crack propagation under fatigue loads and its connection with Wohler fields

  • International Journal of Solids and Structures [2010] – On the Jx1-integral and the out-of-plane constraint in a 3D elastic cracked plate loaded in tension

  • Mechanical Systems and Signal Processing [2010] – Erratum to “Scaling-factor estimation using an optimized mass-change strategy” [Mech. Syst. Signal Process. 24(5) (2010) 1260-1273] (DOI:10.1016/j.ymssp.2009.06.011)

  • Mechanical Systems and Signal Processing [2010] – Scaling-factor estimation using an optimized mass-change strategy

  • Fatigue & Fracture of Engineering Materials & Structures [2010] – Building models for crack propagation under fatigue loads: application to macrocrack growth

  • Engineering Structures [2010] – Resistance of the component ‘lateral faces of RHS’ at high temperature

  • Engineering Structures [2010] – Mixed mode fracture toughness: An empirical formulation for GI/GII determination in asymmetric DCB specimens

  • Engineering Failure Analysis [2010] – Forensic analysis of a pile foundation failure

  • International Journal of Fatigue [2010] – Fatigue assessment of a riveted shear splice based on a probabilistic model

  • Polymer Testing [2010] – Theoretical and experimental analysis of carbon epoxy asymmetric dcb specimens to characterize mixed mode fracture toughness

  • Engineering Failure Analysis [2010] – Forensic analysis of a pile foundation failure

  • International Journal of Coal Geology [2010] – Storage of N-2, He and CH4 in coal: Study and application in a practical case in the central Asturian coal basin (northern Spain)

  • Engineering Failure Analysis [2010] – Forensic analysis of the evolution of damages to buildings constructed in a mining area (Part II)

  • Communications in Statistics: Simulation and Computation [2009] – An exponential model for damage accumulation

  • Polymer Testing [2009] – Fractography and failure mechanisms in static mode I and mode II delamination testing of unidirectional carbon reinforced composites

  • Computational Materials Science [2009] – Numerical and experimental validation of computational models for mode I composite fracture failure

  • Fatigue and Fracture of Engineering Materials and Structures [2009] – Fatigue behaviour of duplex stainless steel reinforcing bars subjected to shot peening

  • Mechanical Systems and Signal Processing [2009] – Scaling-factor estimation using an optimized mass-change strategy

  • Materiales de Construccion [2009] – Experimental study comparing the behaviour of steel truss plates and birch plywood inserts in ridge joints on glued laminated rafters

  • Construction and Building Materials [2009] – Creep and shrinkage of recycled aggregate concrete

  • Materials and Structures/Materiaux et Constructions [2009] – Long term deformations by creep and shrinkage in recycled aggregate concrete

  • Materiales de construcción [2009] – Estudio comparativo experimental del comportamiento de uniones de cumbrera en cubiertas de madera laminada encolada con placas interiores de acero o tablero contrachapado de abedul

  • Probabilistic Engineering Mechanics [2009] – A statistical fatigue model covering the tension and compression Wöhler fields

  • International Journal of Fatigue [2009] – Experimental validation of a statistical model for the Wöhler field corresponding to any stress level and amplitude

  • International Journal of Solids and Structures [2009] – On the Jx1-integral and the out-of-plane constraint in a 3D elastic cracked plate loaded in tension

  • Waste Management [2009] – Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties

  • Engineering Failure Analysis [2009] – Forensic analysis of the evolution of damages to buildings constructed in a mining area (Part II)

  • Meccanica [2009] – Computational models for mode I composite fracture failure: the virtual crack closure technique versus the two-step extension method

  • Probabilistic Engineering Mechanics [2009] – A statistical fatigue model covering the tension and compression Wöhler fields

  • WEBIST 2009 – Proceedings of the 5th International Conference on Web Information Systems and Technologies [2009] – ICT training approach for the structural steel design under the eurocodes

  • Polymer Testing [2009] – Fractography and failure mechanisms in static mode I and mode II delamination testing of unidirectional carbon reinforced composites

  • International Journal of Fatigue [2009] – Experimental validation of a statistical model for the Wöhler field corresponding to any stress level and amplitude

  • Meccanica [2009] – Computational models for mode I composite fracture failure: the virtual crack closure technique versus?the?two-step extension method

  • Materiales de construcción [2009] – Estudio comparativo experimental del comportamiento de uniones de cumbrera en cubiertas de madera laminada encolada con placas interiores de acero o tablero contrachapado de abedul

  • Communications in Statistics: Simulation and Computation [2009] – An exponential model for damage accumulation

  • Computational Materials Science [2009] – Numerical and experimental validation of computational models for mode I composite fracture failure

  • Waste Management [2009] – Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties

  • Construction and Building Materials [2009] – Creep and shrinkage of recycled aggregate concrete

  • Fatigue and Fracture of Engineering Materials and Structures [2009] – Fatigue behaviour of duplex stainless steel reinforcing bars subjected to shot peening

  • Materiales de Construccion [2009] – Experimental study comparing the behaviour of steel truss plates and birch plywood inserts in ridge joints on glued laminated rafters

  • Engineering Fracture Mechanics [2008] – A statistical model for crack growth based on tension and compression Wohler fields

  • Journal of Thermoplastic Composite Materials [2008] – Wear behavior of a glass fiber-reinforced PEI composite

  • Materials Letters [2008] – A general regression model for statistical analysis of strain-life fatigue data

  • Journal of Advanced Materials [2008] – A comparison between the behavior of glass and carbon fiber fabric reinforced PEI subjected to hygrothermal loads

  • Forest Products Journal [2008] – Variation of impact bending in the wood of Pinus sylvestris L. in relation to its position in the tree

  • International Journal of Fatigue [2008] – A general model for fatigue damage due to any stress history

  • International Journal of Fatigue [2008] – A critical comparison of two models for assessment of fatigue data

  • International Journal of Production Economics [2008] – Rapid cost estimation of metallic components for the aerospace industry

  • Composites Science and Technology [2008] – Interlaminar crack initiation and growth rate in a carbon-fibre epoxy composite under mode-I fatigue loading

  • High Performance Structures and Materials Iv [2008] – Interlaminar crack initiation and growth under modes I and II in a carbon-fibre epoxy composite subjected to fatigue

  • International Journal of Fatigue [2008] – A general model for fatigue damage due to any stress history

  • Journal of Thermoplastic Composite Materials [2008] – Wear behavior of a glass fiber-reinforced PEI composite

  • International Journal of Fatigue [2008] – A critical comparison of two models for assessment of fatigue data

  • High Performance Structures and Materials IV [2008] – Interlaminar crack initiation and growth under modes I and II in a carbon-fibre epoxy composite subjected to fatigue

  • Composites Science and Technology [2008] – Interlaminar crack initiation and growth rate in a carbon-fibre epoxy composite under mode-I fatigue loading

  • Engineering Fracture Mechanics [2008] – A statistical model for crack growth based on tension and compression Wohler fields

  • Forest Products Journal [2008] – Variation of impact bending in the wood of Pinus sylvestris L. in relation to its position in the tree

  • Materials Letters [2008] – A general regression model for statistical analysis of strain-life fatigue data

  • Journal of Advanced Materials [2008] – A comparison between the behavior of glass and carbon fiber fabric reinforced PEI subjected to hygrothermal loads